I'm all about keeping projects short and simple. Well this girls sundress is as easy as it gets. One day when trolling the clearance aisle at Joann Fabric my 4 year old spotted this fabric and was obsessed with it.
With an additional 50% off the sale price I picked up a half yard for $6. My plan was to cut it to make 2 dresses, one for each of my girls. After hemming the bottom, a basic straight stitch attached the sides of the fabric to create a tube. A 2 inch strip of leftover fabric was folded and sewed to make the straps.
The seam is on the side and barely noticeable. My daughter wanted the dress very long and has been wearing it around the house everyday since.
The dress will grow with her for a few years of use. When she saw the camera she went right into her Tae Kwon Do kicks and blocks followed with these poses.
Unfortunately I was a little short of fabric to make the second dress. I sewed it together anyway and my youngest happily squeezed herself into it to be like her big sis.
Not the typical clothing choice for the "Polar Vortex" we're experiencing but the girls love it!
Showing posts with label Sewing. Show all posts
Showing posts with label Sewing. Show all posts
Friday, January 24, 2014
Sunday, December 15, 2013
Bench Slipcover
Do you have a piece of furniture you just had to have and now look at it and say to yourself, "why oh why"? Well I do. In fact I have a house full of questionable purchases. I still like most of them but payed way too much and didn't think how they would work with kids. This bench was purchase from RH back in 2005.
It's been in the girls room so Mike and I could have a place to sit. Ususally it's covered in a quilt because the fabric shows stains easily. I finally decided to tackle a slipcover in my quest to conquer my sewing machine.
I started with this amazing fabric from TonicLiving. Let me tell you, it is even more gorgeous in person. This fabric has the most lovely shades of lavender and plum with little hits of dark blue, grass green and greige. Since it was the inspiration for the entire room I decided to order two yards even though it was a little more than I originally planned to spend.
After the fabric was washed and dried a large top piece was cut with piping which was pinned then sewed on. This was only the second time I've made piping and I improved my technique a bit. I didn't sew as closely when making the piping so the stitches would be covered when sewing all the pieces together. I also overlapped the piping fabric following the instructions from this tutorial. I used an old Nate Berkus for Linens N Things sheet (this was his line years ago before Target) for the piping and each corner because the color worked and there wasn't enough floral fabric for these parts.
I then cut and hemmed the four small corner, two short side side and two long side pieces. The top edge was zigzag stitched to prevent fraying.
The four floral pieces were pinned followed by four corner pieces on top of that. This took some adjusting and repinning to make sure the fabric all fell to same length. This shows how the corner looked pinned. The floral side panels are pinned and laying on top of the bench so you are seeing the "wrong side" of the fabric in this picture.
With a little patience all eight panels were stitched on in. I crossed my fingers and hoped for the best. Was it going to lay straight... Was the fabric going to bunch...Thank goodness it worked!
Now the girls room is starting to make more sense design wise. The lavender dresser's color was pulled from this fabric along with the green trim added to the lamp that was made over.

/>
It's been in the girls room so Mike and I could have a place to sit. Ususally it's covered in a quilt because the fabric shows stains easily. I finally decided to tackle a slipcover in my quest to conquer my sewing machine.
I started with this amazing fabric from TonicLiving. Let me tell you, it is even more gorgeous in person. This fabric has the most lovely shades of lavender and plum with little hits of dark blue, grass green and greige. Since it was the inspiration for the entire room I decided to order two yards even though it was a little more than I originally planned to spend.
After the fabric was washed and dried a large top piece was cut with piping which was pinned then sewed on. This was only the second time I've made piping and I improved my technique a bit. I didn't sew as closely when making the piping so the stitches would be covered when sewing all the pieces together. I also overlapped the piping fabric following the instructions from this tutorial. I used an old Nate Berkus for Linens N Things sheet (this was his line years ago before Target) for the piping and each corner because the color worked and there wasn't enough floral fabric for these parts.
I then cut and hemmed the four small corner, two short side side and two long side pieces. The top edge was zigzag stitched to prevent fraying.
The four floral pieces were pinned followed by four corner pieces on top of that. This took some adjusting and repinning to make sure the fabric all fell to same length. This shows how the corner looked pinned. The floral side panels are pinned and laying on top of the bench so you are seeing the "wrong side" of the fabric in this picture.
With a little patience all eight panels were stitched on in. I crossed my fingers and hoped for the best. Was it going to lay straight... Was the fabric going to bunch...Thank goodness it worked!
Now the girls room is starting to make more sense design wise. The lavender dresser's color was pulled from this fabric along with the green trim added to the lamp that was made over.
Monday, November 4, 2013
Ribbon Trim Pillow
I love ribbon trim on pillows. While Greek key is one of my favorite design details it's a little too complicated for me at this point. I decided on a simple border to add to a dropcloth pillow cover. The ribbon was a deep teal 7/8" from Michael's purchased at 50% off for $2.
Now to be honest I attempted this a year ago using one continuous piece of ribbon and hem tape. From a distance or after a few too many glasses of wine it looked okay. But up close it looked like this.
I've washed it a couple times which led to the corner peeling up. And don't you love my um...45ish degree angles? Embarrassing.
Well I wanted to redeem myself from that debacle and this time was going to do it right. I started by cutting a fabric square to cover my pillow form. Then I cut 4 equal pieces of ribbon roughly one inch shorter than the lenth of the fabric.
Two pieces were matched up and I marked a 45 degree angle using a white pencil, ruler and the lines on my sewing matt.
The ribbon was pinned and sewn together on the marked line.
This was repeated three more times carefully measuring where the next ribbon would attach so each side was exactly the same length. I was left with a perfect square which was then pinned onto the dropcloth fabric.
After that it was easy breezy. I sewed down the inside then outside of the square trim taking my time so the stiches were straight. Each edge was then finished with a zigzag stitch to prevent fraying. I decided on an envelope back so 2 pieces of fabric were cut with the one exposed side of each piece hemmed. Then the 3 pieces of fabric were pinned right sides facing together to create a 4" overlap on the back.
It turned out so much better than the first time. With this one I don't have to tell the kids to stop picking at it.
Now there are two matching ribbon trim pillows, just don't look at the one on the right too closely:)
On a side note during this project my daughter asked for a piece of scrap ribbon. 15 minutes later I walked into the office to find this.
All on her own she stapled the ribbon to the edge of a large piece of paper then colored the rest of the blue border with various crayons and markers. She insisted on also making a pillow so we stapled another piece of paper to the back and stuffed it with crumpled scraps. Of course she had to add a smiley face to make it a "Happy Pillow". Here it is after she personally styled it on the couch.
Her pillow making was by far my most favorite part of this project!
Now to be honest I attempted this a year ago using one continuous piece of ribbon and hem tape. From a distance or after a few too many glasses of wine it looked okay. But up close it looked like this.
I've washed it a couple times which led to the corner peeling up. And don't you love my um...45ish degree angles? Embarrassing.
Well I wanted to redeem myself from that debacle and this time was going to do it right. I started by cutting a fabric square to cover my pillow form. Then I cut 4 equal pieces of ribbon roughly one inch shorter than the lenth of the fabric.
Two pieces were matched up and I marked a 45 degree angle using a white pencil, ruler and the lines on my sewing matt.
The ribbon was pinned and sewn together on the marked line.
This was repeated three more times carefully measuring where the next ribbon would attach so each side was exactly the same length. I was left with a perfect square which was then pinned onto the dropcloth fabric.
After that it was easy breezy. I sewed down the inside then outside of the square trim taking my time so the stiches were straight. Each edge was then finished with a zigzag stitch to prevent fraying. I decided on an envelope back so 2 pieces of fabric were cut with the one exposed side of each piece hemmed. Then the 3 pieces of fabric were pinned right sides facing together to create a 4" overlap on the back.
It turned out so much better than the first time. With this one I don't have to tell the kids to stop picking at it.
Now there are two matching ribbon trim pillows, just don't look at the one on the right too closely:)
On a side note during this project my daughter asked for a piece of scrap ribbon. 15 minutes later I walked into the office to find this.
All on her own she stapled the ribbon to the edge of a large piece of paper then colored the rest of the blue border with various crayons and markers. She insisted on also making a pillow so we stapled another piece of paper to the back and stuffed it with crumpled scraps. Of course she had to add a smiley face to make it a "Happy Pillow". Here it is after she personally styled it on the couch.
Her pillow making was by far my most favorite part of this project!
Monday, October 28, 2013
When Good Pillows Go Bad, A Lesson on Piping
This past week I decided to try two new pillow sewing projects that I'd never done before. The first one was attempting piping on a pillow. After sewing many basic pillow covers I felt ready to tackle this fabulous detail. How hard could it be right? Well...I made a few mistakes and hopefully any new sewers out there can learn some things not to do.
There are lots of tutorials out their with great details on the specifics for this type of project like this one and this one. For the most part I followed them so here is just a basic rundown of what I did.
Making the piping was very simple. I saved the cording from this curbside rescue that wasn't reused on that project. A few strips of fabric were cut on a 45 degree angle and sewn together to create one long continuous strip of fabric.
Using my zipper foot which came with the sewing machine, I sewed the fabric close to the cord.
The piping was then pinned to the front facing fabric. Little cuts on the extra piping fabric were made on the corners to allow for it to bend.
Next a basic 14" zipper was sewn onto the 2 pieces of fabric for the back of the pillow fabric. I used the same fabric as the piping since the front fabric was on the expensive side.
The front and back fabric pieces right sides facing each other were then sewed together staying as close to the piping as possible. Here is the finished pillow.
So where are the mistakes? There are 3 main things that really bother me about this pillow. First, when pinning the piping onto the leopard fabric I should have rounded the corners more. Also the piping shifted when sewing onto one of the corners. Doesn't it look like a little peninsula sticking out on the top right?
Next, I don't know what I was thinking when attaching the zipper on the two back fabrics. I sewed as close to the zipper as I could with the zipper foot attachment. That's fine with piping but not with zippers! Well, now it is so close the zipper won't lay flat under the fabric and the thread is not in a straight line. Look at this mess. Isn't it lovely? Not.
Lastly, some thread is visible if looking closely between some piping and the front fabric. In the future I would not sew quite as close when creating the piping. This would allow room for the final round of sewing and no previous stiches would peak through.
I learned a lot from creating this pillow cover. Piping is not very forgiving so take your time and be precise about placement. Go slowly when attaching zippers, it's not a race. And don't use expensive fabric when trying out new techniques.
With a little fluffing and arranging this pillow cover still looks pretty good all things considered.
There are lots of tutorials out their with great details on the specifics for this type of project like this one and this one. For the most part I followed them so here is just a basic rundown of what I did.
Making the piping was very simple. I saved the cording from this curbside rescue that wasn't reused on that project. A few strips of fabric were cut on a 45 degree angle and sewn together to create one long continuous strip of fabric.
Using my zipper foot which came with the sewing machine, I sewed the fabric close to the cord.
The piping was then pinned to the front facing fabric. Little cuts on the extra piping fabric were made on the corners to allow for it to bend.
Next a basic 14" zipper was sewn onto the 2 pieces of fabric for the back of the pillow fabric. I used the same fabric as the piping since the front fabric was on the expensive side.
The front and back fabric pieces right sides facing each other were then sewed together staying as close to the piping as possible. Here is the finished pillow.
So where are the mistakes? There are 3 main things that really bother me about this pillow. First, when pinning the piping onto the leopard fabric I should have rounded the corners more. Also the piping shifted when sewing onto one of the corners. Doesn't it look like a little peninsula sticking out on the top right?
Next, I don't know what I was thinking when attaching the zipper on the two back fabrics. I sewed as close to the zipper as I could with the zipper foot attachment. That's fine with piping but not with zippers! Well, now it is so close the zipper won't lay flat under the fabric and the thread is not in a straight line. Look at this mess. Isn't it lovely? Not.
Lastly, some thread is visible if looking closely between some piping and the front fabric. In the future I would not sew quite as close when creating the piping. This would allow room for the final round of sewing and no previous stiches would peak through.
I learned a lot from creating this pillow cover. Piping is not very forgiving so take your time and be precise about placement. Go slowly when attaching zippers, it's not a race. And don't use expensive fabric when trying out new techniques.
With a little fluffing and arranging this pillow cover still looks pretty good all things considered.
Friday, October 18, 2013
Dropcloth Seat Covers
It all started with this fabric. I just had to have it after seeing it in a direct mailer from Walter E Smithe, a local furniture chain. I loved the curved lines, soft blue and thin navy outline.
I spent an embarrassing amount of time hunting the fabric down in the wee hours of the morning and finally found it here. With a 50% coupon it still cost $30/ yard so after ordering 3 yards plus shipping & tax I was out just over $100 to recover 6 dining chairs purchased from Craigslist. This was a lot for me to spend on fabric per yard but it was only 3 yards and I had enough fabric left over to make 2 pillow covers.
Well it didn't take long for me to realize the new seats needed some protection from my 3 young children. At 6, 4, and 2 they have their fair share of spills and messes during mealtime. Slipcovers seemed the only reasonable option so I attempted to whip up a little something regardless of my lack of sewing machine skills.
I chose a fabric drop cloth from Home Depot because of it's low price and durability. To soften the color I soaked the entire dropcloth in a 1 part bleach 3 parts water solution for a few hours. After washing in the washing machine and drying on high heat I was ready to attempt a slipcover. I decided on a very basic cover with a short hemmed skirt on the sides. I used a prehemmed side of the dropcloth for the skirt to save time.
Some of the excess fabric was trimmed to make handling the fabric easier at the sewing machine. I then used my daughter's orange marker to mark the sew line to help guide when sewing it together.
The next hour was spent wrestling with my machine and the fabric. The corners were hard! I wasn't able to create nice little matching pleats but no longer was worried about that and just wanted to finish these things. They are meant for kids and what do they know about slipcovers? I mean, anything had to be a vast improvement over the white bath towels that were constantly draped over the seats right?
I added a back panel after piecing the main parts together. The cover stayed put with no slipping so I skipped ties or tabs. Two of them have been completed, one from start to finish each day.
They have been washed and dried a few times so far and seem to be holding up. Obviously they have a "homemade" quality to them but I really like the way they look with the color and texture - and I feel a sense of accomplishment for tackling a new sewing project. Now only four more to go!
I spent an embarrassing amount of time hunting the fabric down in the wee hours of the morning and finally found it here. With a 50% coupon it still cost $30/ yard so after ordering 3 yards plus shipping & tax I was out just over $100 to recover 6 dining chairs purchased from Craigslist. This was a lot for me to spend on fabric per yard but it was only 3 yards and I had enough fabric left over to make 2 pillow covers.
Well it didn't take long for me to realize the new seats needed some protection from my 3 young children. At 6, 4, and 2 they have their fair share of spills and messes during mealtime. Slipcovers seemed the only reasonable option so I attempted to whip up a little something regardless of my lack of sewing machine skills.
I chose a fabric drop cloth from Home Depot because of it's low price and durability. To soften the color I soaked the entire dropcloth in a 1 part bleach 3 parts water solution for a few hours. After washing in the washing machine and drying on high heat I was ready to attempt a slipcover. I decided on a very basic cover with a short hemmed skirt on the sides. I used a prehemmed side of the dropcloth for the skirt to save time.
Some of the excess fabric was trimmed to make handling the fabric easier at the sewing machine. I then used my daughter's orange marker to mark the sew line to help guide when sewing it together.
The next hour was spent wrestling with my machine and the fabric. The corners were hard! I wasn't able to create nice little matching pleats but no longer was worried about that and just wanted to finish these things. They are meant for kids and what do they know about slipcovers? I mean, anything had to be a vast improvement over the white bath towels that were constantly draped over the seats right?
I added a back panel after piecing the main parts together. The cover stayed put with no slipping so I skipped ties or tabs. Two of them have been completed, one from start to finish each day.
They have been washed and dried a few times so far and seem to be holding up. Obviously they have a "homemade" quality to them but I really like the way they look with the color and texture - and I feel a sense of accomplishment for tackling a new sewing project. Now only four more to go!
Monday, September 9, 2013
My First Zippered Pillow Cover (and Blog Post!)
Well I finally did it. I've been wanting to try a zippered pillow for months but was hesitant since I only started sewing 10 months ago. Since my current obsession is black and white I thought this would be a great project to get my feet wet.
In dreamland I would use the beautiful Le Touche fabric by Brunschwig & Fils but it is crazy expensive! After searching high and low I settled on some IKEA fabric within my budget. I purchased one yard for $8 but only used half of it for the pillow cover.
A basic 14" zipper from Walmart for $2 was used. I was a little overwhelmed with all of the choices at Joanne Fabrics so it was just easier to pick one up at Walmart while running errands.
I followed these excellent instructions to the tee. Along with a $3 travel pillow also from Walmart I am left with this pillow.
This project took about 1.5 hours but hopefully future pillow covers will take less now that I have an idea of what to do. The additional black and white elements are just what this space needed and for a total of $9 including pillow form I'm thrilled with the result. By the way, how did I go this long without embracing this black and white concept?
In dreamland I would use the beautiful Le Touche fabric by Brunschwig & Fils but it is crazy expensive! After searching high and low I settled on some IKEA fabric within my budget. I purchased one yard for $8 but only used half of it for the pillow cover.
A basic 14" zipper from Walmart for $2 was used. I was a little overwhelmed with all of the choices at Joanne Fabrics so it was just easier to pick one up at Walmart while running errands.
I followed these excellent instructions to the tee. Along with a $3 travel pillow also from Walmart I am left with this pillow.
This project took about 1.5 hours but hopefully future pillow covers will take less now that I have an idea of what to do. The additional black and white elements are just what this space needed and for a total of $9 including pillow form I'm thrilled with the result. By the way, how did I go this long without embracing this black and white concept?
Subscribe to:
Posts (Atom)







































